How to run CFW on both sysMMC and emuMMC

⚠️ Added ban risk ⚠️
There is some possibility of getting banned when running CFW on sysMMC without any protection.
Please ensure you read the information page on bans to understand what might possibly get you banned. (Main issue is user error)

If you are interested in running CFW on both emuMMC and sysMMC then you may pick one of the following methods:

• Enable CFW on sysMMC (Recommended)

• Disable / Enable emuMMC (Not Recommended)

Enable CFW on sysMMC

1. Add the following configuration to the end of your /bootloader/hekate_ipl.ini file:

   [CFW sysMMC - Atmosphere]
   pkg3=atmosphere/package3
   emummc_force_disable=1
   icon=bootloader/res/icon_payload.bmp
   

2. Once added, boot back into Hekate, select Launch, and select CFW sysMMC - Atmosphere.
   You will now boot into sysMMC with CFW. This option does not load any patches or blank prodinfo.

---

Disable emuMMC

This is only for you if you boot via Fusee and not via Package3 (This guide does not use fusee)

1. Boot into Hekate.
2. Select emuMMC from the main menu.
3. Select Change emuMMC.
4. Select Disable (power button icon) top right

• Your emuMMC will now be disabled.

To re-enable emuMMC, do the following

1. Boot into Hekate.
2. Select emuMMC from the main menu.
3. Select Change emuMMC.
4. Do one of the following selections based on your emuMMC configuration:
   Alternative a) Partition based emuMMC (click to expand)

   • Select SD RAW 1 or SD RAW 2 or SD RAW 3.
   Alternative b) File based emuMMC (click to expand)

   • Select emuMMC/SD00/ or emuMMC/ER00/

---

↵ Homebrew & misc 🦝